#COPY TFTP FLASH COMMAND MANUAL#
#COPY TFTP FLASH COMMAND SOFTWARE#
#COPY TFTP FLASH COMMAND PASSWORD#
#COPY TFTP FLASH COMMAND PC#

Configure interfaces as listed in the table above.

R1(config)# banner motd $ Authorized Users Only! $

Create a banner that warns anyone accessing the device that unauthorized access is prohibited.

#COPY TFTP FLASH COMMAND PASSWORD#

Assign cisco as the VTY password and enable login.

Assign cisco as the console password and enable login.

Assign class as the privileged EXEC encrypted password.

Disable DNS lookup to prevent the router from attempting to translate incorrectly entered commands as though they were host names.

Step 2: Configure basic settings for the router. Step 1: Cable the network as shown in the topology.ДЄttach the devices as shown in the topology diagram, and cable as necessary. In Part 1, you will set up the network topology and configure basic settings, such as the interface IP addresses for router R1, switch S1 and PC-A.

Instructions Part 1: Build the Network and Configure Basic Device Settings

Ethernet cables as shown in the topolog y.

Console cables to configure the Cisco IOS devices via the console ports.

#COPY TFTP FLASH COMMAND PC#

1 PC (Windows with a terminal emulation program, such as Tera Term).

1 Switch (Cisco 2960 with Cisco IOS Release 15.2(2) lanbasek9 image or comparable).

1 Router (Cisco 4221 with Cisco IOS XE Release 16.9.3 universal image or comparable).

#COPY TFTP FLASH COMMAND MANUAL#

If you are unsure contact your instructor.ДЄnswers Note : Refer to the Answers Lab Manual for the procedures to initialize and reload devices Required Resources Note : Ensure that the routers and switches have been erased and have no startup configurations. Refer to the Router Interface Summary T able at the end of the lab for the correct interface identifiers. Depending on the model and Cisco IOS version, the commands available and the output produced might vary from what is shown in th e labs. Other routers, switches, and Cisco IOS versions can be used. The switches used in the labs are Cisco Catalyst 2960s with Cisco IOS Release 1 5.2(2) (lanbasek9 image). Note : The router s used with CCNA hands-on lab s are Cisco 4221 with Cisco IOS XE Release 1 6.9.4 (universalk9 image). The instructions here for the TFTP server configuration and operation are generic and there may be some differences in terminology with your TFTP server software. You can edit the file using a text editor and copy the new configuration back to a Cisco device.

#COPY TFTP FLASH COMMAND SOFTWARE#

In this lab, you will use TFTP server software to back up the Cisco device running configuration to the TFTP server. A removable USB flash drive can also be used for backup purposes. With the larger size of the CF memory, additional files can be stored for backup purposes. The IOS image for the router resides in the CF memory, and the router uses this IOS Image for the boot process. The CF is a removable memory module that has replaced the limited internal flash memory of earlier router models. In addition to a TFTP server, most of the current Cisco routers can back up and restore files locally from CompactFlash (CF) memory or a USB flash drive. Using a centralized TFTP server, you can back up files from many different Cisco devices. A TFTP server is a centralized and secure method used to store the backup copies of the files and restore them as necessary. A TFTP server is often used to backup configuration files and IOS images in production networks.

It is important to maintain backups of the latest device configurations, as well as a history of configuration changes. Part 5: (Optional) Use a USB Drive to Back Up and Restore the Running Configuration Background / ScenarioД¬isco networking devices are often upgraded or swapped out for a number of reasons. Part 4: Back Up and Restore Running Configurations Using Router Flash Memory Part 3 Use TFTP to Back Up and Restore the Router Running Configuration Part 2: Use TFTP to Back Up and Restore the Switch Running Configuration Part 1: Build the Network and Configure Basic Device Settings

Copy tftp flash command